BIẾN TẦN

Joomla Templates and Joomla Extensions by ZooTemplate.Com

Đối tác

Liên hệ

Online:
Mr Phương: 0988906030
Mail: phuongautomag@gmail.com

Biến tần DOLIN DL-9100 Series

 

 

High Performance Vector Frequency Inverter

Model Number, Specification and Technical Standard
pic1_1

 

Voltage (V) 220V 220V 380V 460V 575V 660V
(1F) (240V) (415V) (440V)
Power (KW) Current (A) Current (A) Current (A) Current (A) Current (A) Current (A)
0.4 2.5 2.5
0.75 4 4 2.5 2.5
1.5 7 7 3.7 3.7
2.2 10 10 5 5
4 16 16 8.5 8
5.5 20 20 13 11
7.5 30 30 16 15
11 42 42 25 22 17 15
15 55 55 32 27 22 18
18.5 70 70 38 34 26 22
22 80 80 45 40 33 28
30 110 110 60 55 41 35
37 130 75 65 52 45
45 160 90 80 62 52
55 200 110 100 76 63
75 260 150 130 104 86
83 320 170 147 117 98
110 380 210 180 145 121
132 420 250 216 173 150
160 550 300 259 207 175
187 600 340 300 230 198
200 660 380 328 263 218
220 720 415 358 287 240
250 470 400 325 270
280 520 449 360 330
315 600 516 415 345
375 680 600 450 390
400 750 650 520 430
450 820 720 650 465
500 900 800 700 550
560 1000 900 780 590
630 1100 1000 850 680

 

Technical Standard of 9100 Series Frequency Inverter

Item Standard
Power Input 3P 380V (1P 220V)50/ 60Hz
Allowed Variation Effective voltage: 380V(220V)±15%
Voltage allowance: ±15% variation; frequency variation: ±5%
Control Control Vector control without sensor, V/F control
Frequency range 0-650 Hz
Output frequency accuracy ±0.01% of maximum frequency
Frequency resolution Keyboard setting: ±0.01% of output frequency
±0.2% of maximum output frequency
Voltage/frequency characteristic 30%-100% rating voltage, adjustable base frequency 0.5- 640Hz
PWM carrier frequency 0.5-15.00 KHz
Torque upgrade 150% rating torque at 0.50Hz
Overload ability 60 seconds at 150% rating current, 10 seconds at 180% rating current
Acceleration and deceleration 0.1-3600 seconds
Speed rate No PG control: 1: 100
Speed accuracy No PG control: ±0. 5% maximum speed
Rating output voltage Auto voltage adjustable function: When the voltage on the grid network changes, output voltage can automatically remain constant.
Standard function RPM trace, deceleration pause, PID control, auto speed compensation, auto voltage regulation (AVR), 8-step run, power (torque) control, frequency leap, simple PLC, UP-Down control, swing run, two-loop signal overlapping, auto reset, timer, flip-flop non-stop.
Standard protection Over-current, over-voltage, under-voltage, over-temperature, phase reversal and overload.
Run Frequency simulation input External terminal Al1: 0- 10V
External terminal Al2: 4-20mA, panel potentiometer
Simulation output External terminal AM, 0-10V or 0- 20mA
Digital signal input Programming input terminals for X1- X4
Digital signal output One set of relay signal: 3A/ 250VAC
One auxiliary signal output (open-collector electrode): 24VDC-50mA
Setting Function, data, output current, output power for power factor angle, input power, power coefficient, timer time.
Run Output frequency, setting frequency, output current, input voltage, motor RPM, forward/backward turn, output power limit, conversion of output frequency and RPM, linear lead voltage, output voltage, temperature inside frequency inverter.
Fault Over-voltage, under-voltage, over-current ,over load over-temperature, over-voltage loss, data protection damaged, voltage limit, fault run, history fault.
Environment Installation location Indoor, altitude less than 1000m, dust-free, no corrosive gas, no direct sunlight.
Ambient temperature and humidity - 10~ + 40℃, 20%~ 90%RH (no condensation)
Vibration less 0.5g below 20Hz
Storage temperature -25~+65oC
Installation Wall mounted
Protection grade IP20
Cooling Air cooling


 

Features of 9100 Series Frequency Inverter

9100 series frequency inverters developed for the customer requirement , and adopt the state-of-art control to implement high torque, high accuracy, and wide speed regulation, so that can meet the requirement for the general frequency inverter. The practical PID regulator, the simple PLC, the programming input/output terminal control, remote control with synchronization, and control by pulse frequency are provided for special locations. The main purposes are used at the locations for the customized frequency inverter and special frequency inverter. The standard frequency inverters are 1P 220V 0.4kw-2.2kw only.

Main range: 220V 0.4kw-110kw
380V0.75kw-160kw

  1. 220V 0.4kw-1.5kw  adopt  mini frequency inverter with compact size and convenient installation.  Length x width x height 85*140*125mm
  2. Enhance the counting function with photoelectric switches to implement the complex auto run.
  3. The eight-step speed can be set freely by multi-stage control.
  4. Install one main pump and many auxiliary pumps to constantly supply water, and increase the function to detect the channel fault.
  5. Detail electrical parameters and accurate match to enhance the device power factor for the device.
  6. Provide the fault alarm testing item to easily eliminate the faults.

 


Typical Wiring Diagram for 9100 Series Frequency Inverter


​Frequency Inverter Dimensions and Accessories
Guide to brake assembly
The following table is the guidance data, where a user can select the resistance and the power according to the actual conditions (The resistance must not be less than the recommended value in the table, but the power can be increased.). The brake resistor is selected according to the power generated by the motor in the actual applications, related to the system inertia, the deceleration time, the energy of potential load, depending on the customer requirements. The larger system inertia is, the shorter deceleration time is needed; the more frequent brake is applied, the larger power of the brake resistor is selected and the resistance is smaller.

Selection of resistance
During the brake, the recycling energy from the motor is almost consumed on the brake resistor.
According to the formula: U*U/ P= Pb
■ U in the formula - - -  brake voltage
(depending on the system, generally take 700V for 380VAC system)
■ pb--- brake power

Power selection for brake resistor
In theory, the power for the brake resistor is consistent with the brake power. However, derating is considered as 70%.
According to the formula: 0.7*Pr=Pb*D
■ Pr--  resistance power
■ D--- brake frequency (The recycling process shares the ratio of the whole work.)
Elevator -- -20%~30%  
unwind and wind ---20%~30%  
centrifuge  ---50%~60% 
Sudden brake load --5%
generally take 10%

Brake assembly table (Model G for example)
Voltage (V) Power Level Resistance (Ω) Capacity (Watt) Remark
220 0.4KW 200 80 Built-in brake unit
0.75KW 200 80 Built-in brake unit
1.5KW 100 150 Built-in brake unit
2.2KW 60 250 Built-in brake unit
3.7KW 40 300 Built-in brake unit
5.5KW 30 500 Built-in brake unit
380 0.75KW 360 200 Built-in brake unit
1.5KW 180 400 Built-in brake unit
2.2KW 180 400 Built-in brake unit
3.7KW 100 500 Built-in brake unit
5.5KW 100 500 Built-in brake unit
7.5KW 50 1000 Built-in brake unit
11KW 50 1000 Built-in brake unit
15KW 40 1500 Built-in brake unit
18.5KW 40 1500 Built-in brake unit
22KW 30 3000 The brake unit
can be customized
when ordering.
30KW 20 5000
37KW 20 5000
45KW 15 9600
55KW 15 10000
75KW 10 12000
93KW 8 20000
110KW 8 20000
132KW 6 25000
160KW 6 25000
The discharge cycle is defined as 10%.

Remark:

  1. The brake assemblies are used to consume some potential or energy fed from the load with larger inertia to the frequency inverter, which can avoid inverter trip owing to high voltage. They can be applied for the load with larger inertia and frequent brake or quick parking.
  2. The brake assemblies belong to peripherals. The brake unit is built in the inverter (0.75-18.5). If the brake function over 22kW is required, please order the inverter with the brake.
  3. Don't directly connect the discharge resistor to the P or N terminal. If the inverter terminal is P or N, the discharge block must be additionally installed. If the brake assembly over 93KW is connected to the P or N terminal, please remind us before ordering.

 

General Inverter Diagrams and Dimensions
pic1_15

Inverter Dimension and Installation Opening List​
Model Number W
(mm)
W1
(mm)
H
(mm)
H1
(mm)
D
(mm)
d
(mm)
9100-1T-00040-G-B 85 77 140 132 125 Ø3
9100-1T-00075-G-B
9100-1T-00150-G-B
9X00-1T-00220-G-B 126 115 170 160 160 Ø4
9X00-3T-00075-G-B
9X00-3T-00150-G-B
9X00-3T-00220-G-B
9X00-3T-00400-G-B    9X00-3T-00550-P-B
9X00-1T-00400-G-B 150 134 220 203 172 Ø4
9X00-1T-00550-G-B
9X00-3T-00550-G-B    9X00-3T-00750-P-B
9X00-3T-00750-G-B    9X00-3T-01100-P-B
9X00-3T-01100-G-B    9X00-3T-01500-P-B 218 108 338 323 228 Ø9
9X00-3T-01500-G-B    9X00-3T-01850-P-B
9X00-3T-01850-G-B    9X00-3T-02200-P
9X00-6T-01100-G 265 130 430 420 240 Ø9
9X00-3T-02200-G    9X00-3T-03000-P    9X00-6T-01500-G
9X00-3T-03000-G    9X00-3T-03700-P    9X00-6T-01850-G
9X00-3T-03700-G    9X00-3T-04500-P    9X00-6T-02200-G
9X00-3T-04500-G    9X00-3T-05500-P    9X00-6T-03700-G 353 200 600 576 299 Ø11
9X00-3T-05500-G    9X00-3T-07500-P    9X00-6T-04500-G
9X00-3T-07500-G    9X00-3T-09300-P    9X00-6T-05500-G
9X00-3T-09300-G    9X00-3T-11000-P    9X00-6T-07500-G 397 300 684 600 336 Ø11
9X00-3T-11000-G    9X00-3T-13200-P    9X00-6T-09300-G
9X00-3T-13200-G    9X00-3T-16000-P    9X00-6T-11000-G
9X00-3T-16000-G    9X00-3T-18700-P    9X00-6T-13200-G
9X00-3T-18700-G    9X00-3T-20000-P    9X00-6T-16000-G 590 - 1114 - 410 -
9X00-3T-20000-G    9X00-3T-22000-P    9X00-6T-18700-G
9X00-3T-22000-G    9X00-3T-25000-P    9X00-6T-20000-G
9X00-3T-25000-G    9X00-3T-28000-P    9X00-6T-22000-G
9X00-3T-28000-G    9X00-3T-31500-P    9X00-6T-25000-G 692 - 1260 - 355 -
9X00-3T-31500-G    9X00-3T-37500-P    9X00-6T-28000-G
9X00-3T-37500-G    9X00-3T-40000-P    9X00-6T-31500-G
9X00-3T-40000-G    9X00-3T-45000-P    9X00-6T-37500-G 814 - 1624 - 430 -
9X00-3T-45000-G    9X00-3T-50000-P    9X00-6T-40000-G
9X00-3T-50000-G    9X00-3T-56000-P    9X00-6T-45000-G
9X00-3T-56000-G    9X00-3T-63000-P    9X00-6T-50000-G
9X00-3T-63000-G    9X00-3T-56000-G
9X00-6T-01100-G
9X00-3T-00750-ZS-B (integrated cabinet) 220 - 685 - 240 -
9X00-3T-00110-ZS-B (integrated cabinet)
​9X00-3T-01500-ZS-B (integrated cabinet)
9X00-3T-01850-ZS-B (integrated cabinet)
9X00-3T-02200-ZS-B (integrated cabinet) 285 - 700 - 270 -
9X00-3T-00300-ZS-B (integrated cabinet)
9X00-3T-03700-ZS-B (integrated cabinet)
9X00-3T-04500-ZS-B (integrated cabinet) 330 - 930 - 340 -
9X00-3T-05500-ZS-B (integrated cabinet)
9X00-3T-07500-ZS-B (integrated cabinet)
Sản phẩm cùng loại
Share

Tin mới hơn: